Two Components Silicone Potting (Part A&B) -9616

Product Description

Kootai 9616 is a room-temperature-curing, dual-component silicone formulated for high-performance encapsulation of electronic assemblies. The compound cures into a durable rubber elastomer with minimal shrinkage and no exothermic reaction, offering outstanding thermal conductivity (1.61.8 W/mK) and electrical insulation.
It provides a wide operating temperature range of -50C to +200C and adheres well to a variety of substrates such as PC, ABS, Epoxywithout the need for primers. Its excellent moisture-, shock-, and weather-resistance, along with RoHS compliance and non-corrosiveness, make it a reliable choice for mission-critical electronics.

Industrial Application

• - Encapsulation of high-power LED modules
• - Protection for automotive HID lamp stabilizers and ignition systems
• - Potting of sensors, transformers, and signal amplifiers
• - Waterproof and high-voltage-resistant coating for PCBs and power modules
• - Mechanical and environmental shielding of general electronics 

FAQ

Q1: What is the mixing ratio for 9616?
A: Mix Part A and Part B in a 1:1 weight ratio. Stir Part A and shake Part B well before combining.
Q2: Is degassing necessary?
A: Natural defoaming usually suffices for potting depths <10 mm. For thicker applications, vacuum degassing (70 mmHg for at least 3 minutes) is recommended.
Q3: What is the curing time?
A: Surface dry in 3090 minutes at 25C. Full cure in 24 hours, faster with heat: 30 min at 80C, 20 min at 100C.
Q4: What are its electrical properties?
A: Dielectric strength of 10 kV/mm, volume resistivity 1.010 cm, dielectric constant of 3 at 60Hz.
Q5: Can it be used without a primer?
A: Yes, it adheres well to most materials without primer, though surface cleaning is recommended.